flash arm-凯发旗舰厅

flash arm 简介
flasher arm主要是为了针对微处理器片上或是外部flash和arm内核的编程工具。
为烧写flash目标而设计了j-flash 和 stan-alone。flasher arm具有所有j-link的功能。
通过usb或是rs232串口连接pc。可运行在microsoft windows 2000, windows xp, windows 2003 ,windows vista，windows 7,windows 8或windows 10。 内置有20引脚的jtag连接器, 此连接器与arm标准20引脚连接器兼容。 通常arm闪存器支持外部闪存编程， 如并行nor闪存， 串行nor闪存， nand闪存和数据闪存。 arm闪存器可通过自动测试器远程控制， 不需连接至电脑和arm闪存器电脑程序， 产品自身配有额外的硬件控制功能。

flasher arm 品牌：segger

flasher arm产地：美国
 

功能特征：

1. ?独立式jtag/swd编程器
2. ?以太网接口
3. ?支持内部和外部闪存设备
4. ?2年免费支持软件升级
5. ?64mb存储器用于存储目标程序
6. ?支持串行与目标程序
7. ?数据文档可升级为海量存储或通过j-flash
8. ?目标接口有：jtag/swd
9. ?通过usb供电,不需其它电源
10. ?可被用做j-link (jtag仿真器), 下载速度高达720k字节/妙
11. ?编程速度介于30k字节/秒至300k字节/秒, 具体视目标硬件而定
12. ?不使用 pc program可通过ascii命令直接控制flasher 

flasher arm

flash programmer for arm and cortex cores

flasher arm is a programming tool for microcontrollers with on-chip or external flash memory and arm core. flasher arm is designed for programming flash targets with the j-flash software or stand-alone. in addition to that flasher arm has all of the j-link functionality. flasher arm connects via usb, ethernet or via rs232 interface to a pc, running microsoft windows 2000, windows xp, windows 2003, windows vista, windows 7, windows 8 or windows 10 and has a built-in 20-pin jtag connector, which is compatible with the standard 20-pin connector defined by arm.

features

·stand-alone jtag/swd programmer (once set up, flasher can be controlled without the use of pc program)

·ethernet interface

·supports internal and external flash devices

·wide range of devices are supported. for a complete list, 

·free software updates¹, 2 years of support

·64 mb memory for storage of target program

·serial in target programming supported

·data files can be updated as mass storage or via j-flash

·target interface: jtag / swd

·no power supply required, powered through usb

·can be used as j-link (jtag emulator) with a download speed of up to 1 mbyte/second

·programming speed typically between 30 kb/second and 1 mbyte/second. max. programming speed highly depends on target hardware and max. programming speed of the flash itself

·ascii command interface to control flasher without the use of pc program

· allows to limit the number of flash programming cycles and to protect the flasher against non-authorized access in case of external production.